FLOW INJECTION ANALYZERS

FLOW INJECTION ANALYZERS 2018-07-13T12:57:51+00:00

The PIACON-12 analyser is the measurement instrument registered in the Federal Agency of Technical Regulation and Metrology of the Russian Federation and hold the valid certicate of the approval type of measuring instruments.

PIACON-03 FLOW-INJECTION PHOTOMETRIC ANALYSER

Инжекционный анализатор

Used to measure composition of water and physico-chemical properties. The operation principle is based on the photometric method for determining the content of the prepared sample controlled substance.

Analyser implements certified measurement procedure developed by NAECO specialists.

MEASUREMENTS

  • Dissolved forms of iron

  • Nitrate-ions

  • Nitrite-ions

  • Colour

  • Silicates

  • Alkalinity

  • Manganese-ions

  • Ammonium-ions

  • Zinc-ions

  • Copper-ions

  • Anion surface-active substances

  • Cation surface-active substances

  • High-density metals (cadmium, cobalt, copper, lead, zinc)

  • Phosphate-ions

  • Sulfate-ions

  • Formaldehyde

  • Phenol

SPECIFICATION

Operating temperature range +10°C…+35°C
Temperature of analysed sample +4°C…+35°C
Analytic wavelengths 460 nm; 520 nm; 660 nm
Range of measurements of transmission coefficient 10 % …100 %
Limits of the absolute accuracy of the analyzer when measuring the transmission coefficient ± 1,5%
Performance of peristaltic pump 1…12 cm³/min
Number of pump channels from 1 to 5
Type of hydraulic crane Faucet valve or switch-way valve
Single measurement duration no more than 6 min
Operation mode setup time no more than 30 min

PIACON-11 FLOW-INJECTION FLUOROMETRIC ANALYSER

Инжекционный анализатор

Used for measuring of the dissolved petroleum products mass concentration in water. The operation principle is based on the fluorimetric method for determining the concentration of dissolved petroleum products in the prepared sample.

Analyser implements certified measurement procedure developed by NAECO specialists.

MEASUREMENTS

  • Dissolved oil

KEY FEATURES:

  • Fluorometric detector
  • Control unit based on PC with dedicated software
  • Flow-injection analysis methods using
  • Certified measurement procedure
  • Autonomous location or location in mounting electrohydraulic module combined with other analysers
  • Ability to work as part of the automated complex
  • Verification interval – 1 year

SPECIFICATION

Operating temperature range +15°C…+35°C
Temperature of analysed sample +4°C…+35°C
Range of dissolved oil mass concentration 0.1…4.0 mg/dm³
Range of measurements of transmission coefficient ± 25 %
Performance of peristaltic pump 1…12 cm³/min
Number of pump channels from 1 to 5
Type of hydraulic crane Faucet valve
Single measurement duration no more than 6 min
Operation mode setup time no more than 30 min

PIACON-12 FLOW-INJECTION CHEMILUMINESCENT ANALYSER

Инжекционный анализатор

Used to measure the hydrogen peroxide content in the water.

Operation principle is based on the chemiluminescent method for determining of hydrogen peroxide in the prepared sample.

MEASUREMENTS

  • Hydrogen peroxide

KEY FEATURES:

  • Chemiluminescent detector
  • Control unit based on PC with dedicated software
  • Flow-injection analysis method using
  • Certified measurement procedure
  • Autonomous location or location in mounting electrohydraulic module combined with other analysers
  • Working ability as the part of the automated complex
  • Verification interval – 1 year

SPECIFICATION

Operating temperature range +10°C…+35°C
Temperature of analysed sample +4°C…+35°C
Limit of mass concentration detection of hydrogen peroxide in sea water no more than 0.5 mkg/dm³
Range of mass concentration detection of hydrogen peroxide in sea water 5…70 mkg³/min
Relative total measurement accuracy (probability belief P = 0.95) no more than 40 %
Number of pump channels 5
Single measurement duration no more than 90 s
Operation mode setup time no more than 30 min

PIACON-21 FLOW-INJECTION IONOMETRIC ANALYSER

Инжекционный анализатор

Used for measuring of the ions content in the water. Analyser implements certified measurement procedure developed by NAECO specialists. Operation principle is based on the potentiometric method for determining of controlled components in the prepared sample using ionic-selective electrode.

MEASUREMENTS

  • Chloride-ions

  • Fluoride-ions

KEY FEATURES:

  • Ionometric detector
  • Control unit based on PC with dedicated software
  • Flow-injection and cycled injection analyses methods using
  • Certified measurement procedures
  • Autonomous location or location in mounting electrohydraulic module combined with other analysers
  • Working ability as the part of the automated complex
  • Verification interval – 1 year

SPECIFICATION

Operating temperature range +10°C…+35°C
Temperature of analysed sample +4°C…+35°C
Limits of electromotive force of electrode system
measuring
-2000 mW…+2000 mW
Range of e.m.f. of electrode system measuring ±1.5 mW
E.m.f. limits of additional absolute
measurement accuracy of electrode system
caused by the change of electrical
resistance in the measuring electrode circuit
±1.5 mW
Enter signal limits 5,0%
Type of hydraulic crane Faucet valve or switch-way valve
Number of pump channels 4
Single measurement duration no more than 5 min
Operation mode setup time no more than 30 min